Product ID:4913 M/M PIPE SEALANT
MSDS Date:11/11/1987
FSC:8030
NIIN:00F031350
MSDS Number: BSNDY

CERTIFIED LABORATORIES DIV OF NCH CORP

2730 CARL RD
IRVING, TX 75015
US

Emergency Phone: 214-438-1381

Info Phone: 214-438-4144 EXT 13

Preparer: DON POKRAS

Cage: 53417

CERTIFIED LABS DIV OF NCH CORP

152170 IRVING, TX 75015 US

Telephone: 214-438-1381972-438-1381

Cage: 53417

ETHYLENE, TETRAFLUORO- POLYMER (POLYTETRAFLUOROETHYLENE),

CAS: 116-14-3

RTECS: KX4025000

POLYETHYLENE GLYCOL DIMETHACRYLATE *93/1*

CAS: 25852-47-5

OCTANOL, OCTYL ALCOHOL

CAS: 111-87-5

RTECS: RH6550000

BISPHENOL-A PROPYLENE OXIDE FUMARATE (POLYMER),POLYESTER

CAS: 39382-25-7

SILICA, MICA, MUSCOVITE

CAS: 12001-26-2

RTECS: VV8760000

ACGIH TLV: 3 MG/CUM

CUMENE HYDROPEROXIDE

CAS: 80-15-9

RTECS: MX2450000

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

LD50 LC50 Mixture:ORAL LD50 (LAB ANIMAL): 5000 MG/KG 1
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INTOXICATION, NAUSEA, HEADACHE, DIZZINESS.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER FOR 15
MINUTES. SKIN: FLUSH W/WATER. INGESTION: DON'T INDUCE VOMITING.
KEEP INDIVIDUAL CALM. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:300F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL

Spill Release Procedures:SOAK UP W/ABSORBENT. STORE IN PARTLY FILLED
CLOSED CONTAINER UNTIL DISPOSAL.

Handling and Storage Precautions:STORAGE TEMPERATURES >32F & <110F.
STORE AT MODERATE TEMPERATURES & REFRIGERATED.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. READ ENTIRE LABEL
BEFORE USING PRODUCT.

Ventilation:GENERAL EXHAUST
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health

Boiling Pt:B.P. Text:300F
Vapor Pres:10
Spec Gravity:1.21
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE WHITE PASTE W/ALCOHOLIC ODOR
Percent Volatiles by Volume:10

Stability Indicator/Materials to Avoid:YES
MAY ATTACK SOME THERMOPLASTICS
Stability Condition to Avoid:TEMPERATURES >110F & <32F.
Hazardous Decomposition Products:TOXIC FLUORIDES

Waste Disposal Methods:BURY OR INCINERATE IN ACCORDANCE W/FEDERAL,
STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.